Current Price List
| Part |
Description Normal quantities per carburettor indicated in ( ). See Mikuni Parts List for more details and other parts |
Price each part |
| Type S4/S5 rebuild gasket kits | see Notes on home page, S4 has correct main gasket (1) | $75.00 (readily available now) |
| Type R rebuild gasket kits | see Notes on home page (1) | $75.00 (readily available) |
| Type T rebuild gasket kits | see Notes on home page(1) | $105.00 |
| Jet Cover Gasket | Suit S4, S5, PHH44 (1) | $2.00 |
| Jet Cover Gasket | Suit Type R, PHH40 (1) | $2.00 |
| Choke/Jet cover Gasket | Type T, as supplied with the Type T gasket set (1) | $12.00 |
| Air Bypass Valve Diaphragm | Type T valve on main cover (1) | $16.00 |
| Float Cover Gasket | Three bolt style for Type T (1) | $4.00 |
| Float Cover Gasket | Two bolt style for S5, Type R, PHH40, PHH44 (1) | $2.00 |
| Main Air jets | new from #80--#300 (2) | $6.00 |
| Main Air jets | used or used/drilled from #130--#200 (2) | $4.00 |
| Main jets | new from #100--#250 (2) | $6.00 |
| Main jets | used or used/drilled from #120--#160 (2) | $4.00 |
| Jet Block | used OA | $10.00 |
| Bleed Pipe | used T, M | $4.00 |
| Pilot jets | new from #40--#90 (2) | $8.00 |
| Pilot jets | used from #50--#65 (2) | $6.00 |
| Idle Mixture Screw Type T/R | new (2) | $10.00 |
| Idle Mixture Screw 40mm S5/S4 | new (2) | $10.00 |
| Idle Mixture Screw 44mm S5/S4 | new (2) | $10.00 |
| Idle Mixture Screw Type T/R | used but re-profiled (2) | $7.00 |
| Idle Mixture Screw 40mm S5/S4 | used but re-profiled (2) | $7.00 |
| Idle Mixture Screw 44mm S5/S4 | used but re-profiled (2) | $7.00 |
| Inner Venturi OEM 40mm S4, S5 | new (2) | NLA but ask |
| Inner Venturi OEM 40mm S4 and S5 | used/rebuilt, see Notes above (2) | $25.00 exchanged |
| $35.00 outright | ||
| Inner Venturi OEM 40mm Type T | new (2) | $25.00 |
| Inner Venturi OEM 40mm Type T | used/rebuilt, see Notes above (2) | $15.00 exchanged |
| $20.00 outright | ||
| Outer Venturi suit 40mm S4, S5, T types | used #28--#34 (2) | $18.00 exchanged |
| $25.00 outright | ||
| Outer Venturi suit 40mm S4, S5, T types, | machined to #34 or #36, see Notes above (2) | $25.00 exchanged |
| $30.00 outright | ||
| Outer Venturi suit 40mm S4, S5, T types | new #28 to #34 (2) | $40.00 |
| Jet Block Housing Seal | figure eight seal (2) | $6.00 |
| Pump Jet 'O' ring seal | new (2) | $0.50 |
| Pump Jet | new includes 'O' ring, all types #35--#60 (2) | $16.00 |
| Pump Jet | used includes 'O' ring, common OEM sizes (2) | $12.00 |
| Pump Diaphragm | all types (1) | $26.00 |
| Fuel needle and seat | all types #1.8 or #2.0 (1) | $26.00 |
| Screen Filter | for fuel pipe banjos all types (1) | $13.00 |
| Banjo Fuel fitting 'L' | for front carburettor, all types (1) | $20.00 |
| Banjo Fuel fitting 'T' | for rear carburettor, all types (1) | $28.00 |
| Banjo Bolt | both front and rear (1) includes two washers | $20.00 |
| Ram Tubes | 43mm, to suit 40mm Sidedraughts, red, blue, alloy (2) | $95.00/pair |
| Filter Socks | Filters socks for above, red, blue, green (2) | $43.00/pair |
| Ram Tubes | 62mm, to suit all, red or blue anodised, alloy (2) | $95.00/pair |
| Filter Socks | Filter Socks for above, red, blue, green (2) | $45.00/pair |
For Toyotas
|
Complete bolt on kits for:
2T/3T, 2T-G, 18R-G, 4A-G, 18R,
Includes matched 40mm Solexes, manifold and spacers, ram tubes Filter socks, cable throttle kit, all mounting hardware and jetting to suit motor tune.
|
$1200.00 |
| As above but with matching 44mm Mikunis | POA, on availability of 44mm Mikunis |
| Exchange 40mm Solexes, rebuilt and jetted to suit | $480.00 a pair |
|
Rebuilt Type T 40mm Solexes, including jetting includes suitable linkages if required |
$700.00 a pair |
| Rebuilt S5 or S4 40mm Solexes, including jetting and suitable linkages if required | $700.00 a pair |
| PHH 44mm Mikuni pairs jetted to suit, includes throttle cable kit and suitable linkages | Price dependent on availability |
|
Manifold
for 2T/3T, 18R, Including spacer blocks, mounting hardware and throttle
cable kit. Suits dual Mikuni/Solex 40/44 PHH. |
$370.00 |
| Single Sidedraught Manifold, to suit 2T/3T, 18R and |
$300.00 |
| Manifold for 2T-G, used | $200.00 |
| Manifold for 2T-G, new | $300.00 |
| Manifold for 18R-G, used, short | $200.00 |
| Manifold for 18R-G, used, long | $250.00 |
| Manifold for 18R-G, new | $300.00 |
|
Throttle
Cable Kits, to suit all 2T/3T, 2T-G,
18R-G, 4A-G Single or dual sidedraught |
|
RM Carburetors: Copyright 2011
Hosted by Red Rook
Updated 28/06/11